Top 10 Reliable Factories for Lightweight Bangles: A Guide for Small Online Shops in Australia

the right bangle factory for a small Australian online shop takes a small first order, quotes the weight of every piece in grams, and gets stock to your door in weeks, not months. Ten made our list, from 12-piece stainless steel runs in China to bangles made to order in Melbourne.

 

We make jewellery in Jaipur, so yes, we’re one of the ten. We put ourselves first, and we’ve tried to be straight about where another factory will suit you better. We also did the sums the other lists skip. 

 

Lightweight is a number of grams, so we worked out what a bangle weighs in each common build and metal, and what that means for your margin and your postage. Every factory’s terms come from its own website or trade profile, checked in October 2026. Minimums change, so confirm before you order.

What “lightweight” actually means, in grams?

Our rule of thumb: a sterling silver bangle under 10 g reads as lightweight, 10 to 20 g as everyday, and anything over 25 g as a statement piece. How a bangle is built moves its weight far more than the choice between most metals. We calculated every figure below from the bangle’s shape and the metal’s density, at a 63.5 mm inner diameter (Indian size 2.8). Real pieces vary by a gram or so with texture, finish and clasps.

The same sterling silver bangle, built eight ways

Build (63.5 mm inside)	Weight in 925 silver	Share of a solid 4 mm bangle	What it’s like to wear and sell
2 mm round wire, solid	6.7 g	24%	Fine and stackable; bends out of round if sat on
3 mm round wire, solid	15.3 g	55%	Everyday weight; feels like real silver in the hand
4 mm round wire, solid	27.6 g	100%	Statement piece, priced like one
4 mm hollow tube, 0.3 mm wall	7.7 g	28%	Chunky look, light on the wrist; dents if knocked
4 mm hollow tube, 0.45 mm wall	11.0 g	40%	Same look, much harder to dent
5 x 1 mm flat band, closed	10.5 g	38%	Takes engraving well
5 x 1 mm open cuff, 25 mm gap	9.2 g	33%	Adjustable, so fewer size returns
8 x 1.2 mm flat band, closed	20.2 g	73%	Wide look at a middle weight

Three things stand out:

• Wire thickness is the big lever. Weight rises with the square of the thickness, so going from 2 mm to 3 mm more than doubles the silver.
• Hollow gets you a bold look without the grams. Ask for the wall thickness in writing, because thin walls dent.
• Size matters less than you’d think. A 3 mm solid bangle goes from 13.8 g at size 2.4 to 16.0 g at size 2.10.

The same 3 mm bangle in seven materials

Material	Weight	Against sterling silver	Worth knowing
Sterling silver (925)	15.3 g	Same	Tarnishes; rhodium or an anti-tarnish coat helps
9ct yellow gold	16.5 g	8% heavier	Priced by the gram at gold rates
Brass	12.6 g	18% lighter	Needs plating; ask for nickel-free
316L stainless steel	11.8 g	23% lighter	Waterproof; gold colour comes from PVD coating
Titanium	6.6 g	57% lighter	Very light, but hard to work, so fewer designs
Aluminium	4.0 g	74% lighter	Cheap and light; scratches easily
Acrylic or resin	1.7 g	89% lighter	Fashion pricing only; can crack

Why grams matter more when you sell online?

• Metal cost. Silver jewellery is usually quoted as metal weight times the metal price, plus a making charge, plating and any stones. Halve the grams and you roughly halve the metal part of the price, which is also the part that moves when silver moves.
• Postage. Australia Post takes items up to 260 x 360 x 20 mm and 500 g as large letters, and the cheapest band stops at 125 g. A slim bangle in a padded mailer can fit. Letters aren’t tracked, though, and Australia Post warns that its sorting machines can damage rigid objects, so we’d only post low-priced pieces that way.
• Stacking. Five 6 g bangles weigh about the same as one 30 g statement piece. Light pieces get bought in sets, and sets lift your average order.
• Returns. Light builds have a weak spot. Thin hollow tube dents and very fine wire bends out of round, and both come back as returns and one-star reviews. The fix is a sensible wall thickness, not more metal everywhere.

How we chose the ten?

Each factory had to clear five bars before it made the list.

1. It makes bangles or cuffs itself, or has the tooling to, rather than only reselling.
2. A small shop can start with it: a published minimum a small shop can live with, or a clear path to a quote.
3. It supplies Australia, from here or from overseas.
4. You can check it: a certification, a published process, a trade record or a vetted marketplace profile.
5. It puts its terms in writing.

We haven’t audited the other nine in person. Everything here comes from their own websites and trade profiles, read in October 2026. We also left out a couple of names that show up in automated search summaries, because we couldn’t confirm their bangle production or terms from anything they publish.

Top 10 Reliable Factories for Lightweight Bangles: A Guide for Small Online Shops in Australia

1. Valentine Silver International

Best for: sterling silver and vermeil bangles and cuffs, starting small and staying with one factory as you grow. We run a 70,000 sq ft factory in Jaipur’s Sitapura Special Economic Zone, with about 800 people. The family business started in the emerald trade in the 1920s, and Valentine Silver opened in 2004 with 14 staff. We work in 925 sterling silver, 10k to 18k gold and brass, export everything we make, and are RJC certified. The published terms:

• US$1,000 minimum order value.
• 10 pieces per design in silver (5 in gold), with at least 3 pieces per stone colour.
• Samples for first-time buyers with no minimum, once approved, delivered in about 15 days.
• Ship Now styles ship in 7 days; standard orders take 45 to 50 days.
• Custom designs: 30 pieces per design and a US$22 development charge per design, paid in full before production starts.
• Gold plating at 1, 2 or 2.5 microns on silver, your logo added free, and product photos and video for your listings.

Our silver catalogue lists hundreds of rings and earrings but only a few dozen bracelets, so most bangle ideas go through the custom route and its 30-piece minimum. Ask for 2.5-micron plating if you want to sell a piece as vermeil. Jaipur runs 5.5 hours behind Sydney and Melbourne during daylight saving, so an email from your afternoon lands in our morning. Request samples or send us a design for a custom quote.

2. Golden Mile Jewellery Manufacturers, Melbourne

Best for: Australian-made gold-look bangles that are light without feeling tinny. A family business in Rowville that has made gold jewellery for the trade since 1990. Every bangle is made to order in its Melbourne factory, in solid gold, solid sterling silver, hollow gold, hollow sterling silver or 9ct gold silver-filled, in any colour and size. It alloys Australian gold and silver in-house and refines its own offcuts.

 

Its silver-filled bangles start as a hollow gold tube with a solid sterling core, heat-bonded and drawn to size. Golden Mile puts the gold at 0.30 to 0.35 mm thick and backs silver-filled bangles with a 10-year warranty. By its own comparison, typical imported filled products carry 0.001 to 0.03 mm of gold. To start: register for trade access on its website. Minimums aren’t published, so ask, and expect gold-content pricing, well above plated silver.

3. Palloys (Pallion), Sydney and nationally

Best for: a shop with its own bangle design that wants it made in Australia.Palloys has been casting since 1951. Its services run from CAD design and 3D printing to casting in all alloys daily, stamping, plating, stone setting and laser engraving, backed by a mould library it calls the largest in the southern hemisphere. You can upload an STL file to palloys.com for a price straight away, or send a sketch, photo or logo for its design team to model. For flat cuffs, ask about stamping: once the tool is made, identical pieces press out quickly. Palloys is built for the trade, so you make the design calls yourself, and short runs usually cost more per piece than overseas.

4. Essentials Jewelry, Jaipur

Best for: brands that need audit-ready ethics paperwork and tightly controlled plating. Essentials Jewelry has worked with brands since 1999. It lists 850+ craftspeople, 100+ quality staff, 40+ CAD designers and capacity for 6,000+ pieces a day, with German plating lines and XRF testing to check plating. It names David Jones among the stores carrying brands it makes for. Its paperwork is the draw: RJC membership, Sedex 4-Pillar, ISO 9001, ISO 14001 and ISO 45001, Disney FAMA approval, and SGS-verified recycled silver and gold. To start: it says it works with startups and invites a sample-first collection. Its Australia page doesn’t publish minimums, so get the MOQ and any sampling fee in writing before you design.

5. DVNJEWELRY, Mumbai

Best for: choosing a finish tier to land a retail price. DVNJEWELRY makes private-label, OEM and ODM jewellery and quotes through its own online request system. Its finishes are set out as tiers: solid gold from 9K to 22K, vermeil at 2.5 microns over sterling silver, 1/20 gold-filled in 12K and 14K, PVD, and gold-plated brass. It describes itself as built for your brand rather than ready stock, so treat any bangle as a custom job, and it doesn’t publish minimums. One tier is sold as vermeil on brass. Vermeil normally means sterling silver underneath, so if you buy that tier, list it as gold-plated brass.

6. Silvesto India, Jaipur

Best for: Indian-style plated bangles and kada at fashion prices. Silvesto says it has made and wholesaled jewellery since 2000, and its product list includes bangles and kada. Platings run from gold and matte gold to rhodium, rose gold, oxidised, black, and two- or three-tone. Its site shows retail-style prices and no wholesale minimums. Before ordering, ask for the base metal, the plating thickness and a sample.

7. FYSARA, China

Best for: waterproof stainless steel bangles in small runs. FYSARA makes stainless steel jewellery and calls itself South China’s first stainless bangle manufacturer, with more than 10 years in production. The Pietra sourcing platform lists it as vetted, with a 12-piece minimum, samples at US$5 to 12, production under 30 days and replies within a day. Its past clients include UK brand Astrid & Miyu. Specify 316L steel, and PVD for gold colour rather than ordinary plating. And remember the weight table: stainless saves only about a quarter of the weight of silver.

8. UVARA Jewelry, Dongguan

Best for: quick development of PVD-coloured cuffs, and stainless and silver lines from one supplier. UVARA was founded in 2010 in Chang’an, Dongguan, and runs an 8,000 m² plant with CNC machining, laser cutting, polishing and PVD plating in-house. It works in 316L stainless steel, 925 silver and brass. Sampling typically takes 10 to 15 working days and production 10 to 20, and it says many e-commerce clients start with small trial orders. Minimums aren’t published, and Dongguan stainless factories commonly ask about 120 pieces per design, so raise it early. Its announced range lists bracelets, so confirm it has bangle tooling for your design.

9. Choon Jewelry, Bangkok

Best for: silver bangles in volume, once a design has proven itself. Choon Jewelry began in 1984 cutting cubic zirconia and has made jewellery since 1993. Its trade profile lists about 800 workers, ISO 9001 certification and a dedicated bracelet preforming unit alongside casting and plating. It works in 925 silver, gold, vermeil and brass, and appears in US customs records as a direct shipper. It’s set up for volume and publishes no minimum. For a sense of scale, another Thai silver maker, Chong Chong, starts at 100 pieces. Choon suits your second or third order more than your first.

10. SUNSRI House of Jewelry, Bali

Best for: handmade, hand-textured Bali-style cuffs, and a factory you can actually visit.

SUNSRI is a family-run maker in Celuk, the silversmithing village near Ubud. It produces sterling silver, brass and copper jewellery, offers full manufacturing services, and runs factory tours, a jewellery museum and making classes. Bali is a short flight from Perth or Darwin, which makes a visit realistic for an Australian shop owner. Minimums aren’t published, and handmade means small differences piece to piece, so say so in your listings.

Which factory to call first

Match the factory to what your shop actually sells.

If your shop needs	Start with	Why
Sterling silver or vermeil, with a small first spend	Valentine Silver	No-minimum samples, then 10 pieces per design
“Made in Australia” on the listing	Golden Mile, or Palloys for your own design	Melbourne-made bangles; Australian casting and stamping
Waterproof bangles for the beach and the gym	FYSARA, or UVARA for fast development	316L steel with PVD colour; 12-piece runs at FYSARA
Ethics paperwork for a stockist or marketplace	Essentials Jewelry	RJC, Sedex, ISO and SGS-verified recycled metal
Indian-style kada and plated bangle sets	Silvesto or DVNJEWELRY	Wide plating range; finish tiers by price
A handmade, hand-textured look	SUNSRI	Celuk silversmiths, open for visits
Hundreds of one silver bangle a month	Choon, or us	Volume capacity in Bangkok and Jaipur

What it costs to land bangles in Australia

A shipment worth A$1,000 or less clears with no duty or GST at the border. Above that you pay 10% GST, any duty and a processing charge, but Indian-made jewellery carries no duty at all.

• A$1,000 or less. The Australian Border Force charges no duty or GST at the border on goods of that value. If you’re registered for GST and give an overseas seller your ABN, it shouldn’t charge you GST on low-value goods bought for your business (ABF notice 2018-13).
• Over A$1,000. You need a full import declaration, and you pay any duty, 10% GST on the goods plus freight, insurance and duty, and an import processing charge. The courier’s broker usually lodges it for you. If you’re registered for GST, you can generally claim the import GST back.
• Duty. Jewellery has carried a 5% general duty in Australia. Indian-made jewellery has been duty-free since the India-Australia trade agreement started on 29 December 2022 (GJEPC), and every tariff line has been zero for Indian goods since 1 January 2026. Ask the factory for proof of origin to claim it. Australia also has trade agreements with China, Thailand and Indonesia, so check the rate for your tariff code with your broker.

A worked example

Say you import A1,500ofsilverbangles,withA120 of freight and insurance.

	Made in India, with proof of origin	Same goods at the 5% general rate
Customs duty	A$0	A$75
GST base: goods + freight and insurance + duty	A$1,620	A$1,695
GST at 10%	A$162	A$169.50
Paid at the border, before the processing charge	A$162	A$244.50

Quality checks for lightweight bangles

• Weight per size, in grams, with an allowed variation. It’s the quickest way to check a production run matches the sample you approved.
• Wall thickness on hollow bangles. Golden Mile works to 0.30 to 0.35 mm of gold and about 0.45 mm of silver tube, which makes a useful yardstick.
• Plating in microns. The trade benchmark for vermeil comes from the US Federal Trade Commission’s Jewelry Guides: at least 10k gold, at least 2.5 microns thick, over sterling silver. Gold-filled means the gold makes up at least 1/20 of the total weight. Anything else is gold-plated, and should be listed that way.
• Purity. Australia has no compulsory hallmarking, and the AS 2140 marking standard is voluntary, so a 925 stamp is the maker’s promise. Ask for XRF readings, and describe metals accurately: a wrong metal claim is misleading under Australian Consumer Law.
• Nickel. Ask for nickel-free alloys and an EN 1811 test result, the method behind the EU limit of 0.5 µg/cm² a week for jewellery worn against the skin.
• Size and shape. Measure the inner diameter of five random pieces, and check they’re round, not oval.
• Hinges and clasps. Open and close a hinged bangle 50 times before you sign it off.

Sizing bangles for online customers

Most Indian factories will quote in these sizes.

Indian size	Inner diameter	Inner circumference
2.2	54.0 mm	17.0 cm
2.4	57.2 mm	18.0 cm
2.6	60.3 mm	19.0 cm
2.8	63.5 mm	19.9 cm
2.10	66.7 mm	20.9 cm
2.12	69.9 mm	21.9 cm

Frequently asked questions

Who makes bangles in Australia?

Golden Mile in Melbourne makes its whole bangle range to order, in solid, hollow and silver-filled gold and silver. Palloys in Sydney casts and stamps bangles to your design. Most other Australian bangle suppliers are wholesalers that import.

What’s a typical minimum order for wholesale bangles?

It varies a lot. FYSARA starts at 12 pieces, asks for US$1,000 and 10 pieces per silver design, Dongguan stainless factories often ask about 120 per design, and Chong Chong in Thailand starts at 100.

Do I need an ABN to buy from a factory?

Australian trade suppliers usually ask for one. For imports, an ABN plus GST registration means overseas sellers shouldn’t charge you GST on low-value orders, and you can claim back GST paid at the border.

Are bangles from India duty-free in Australia?

Yes. Under the India-Australia trade agreement, Indian-made jewellery comes in duty-free with proof of origin. GST still applies to shipments over A$1,000.

What’s the lightest metal for bangles?

Among precious metals, hollow sterling silver: a 4 mm tube with a 0.3 mm wall weighs about 7.7 g at a 63.5 mm inner diameter. Titanium, aluminium and acrylic are lighter again, but sell at very different prices.

Should an online shop sell stainless steel or sterling silver bangles?

Stainless for waterproof everyday wear and lower prices; silver for gifting and perceived value. Weight barely separates them: stainless is about 23% lighter at the same size.

How long does production take?

From 7 days for ready stock in Ship Now range to 45 to 50 days for standard orders from India. UVARA quotes 10 to 20 working days of production after sampling.

Can I put my own logo on the bangles?

Yes, at most of these factories. We adds your logo free; FYSARA, UVARA, Essentials Jewelry and DVNJEWELRY all list logo or private-label work, and Palloys offers laser engraving.